X

Chapter 22 Yamaha 01V96 240
01V96 LCD display modes
Insert display mode
Press the F2 button to select Insert display mode. In this mode, the LCD displays eect edit
parameters. This mode also allows you to switch between dierent Insert slots, enabling each
eect to be edited.
Display Assignment
TIME CODE Active if counter is displaying SMPTE timecode.
BEATS Active if counter is displaying bars/beats/divisions/
ticks.
Counter Displays either SMPTE timecode or bars/beats/
divisions/ticks.
SELECT ASSIGN Displays the encoder assignment as follows: Pan, Snd1
to Snd8, S1As to S8As, In, Out.
COMPARE Switches the display between “track name/parameter
name” and “parameter name/parameter value” modes.
BYPASS Switches the bypass state of plug-in currently being
edited.
INSERT/PARAM Switches between Plug-in Assign and Plug-in Edit
modes.
Selecting virtual encoders 1 to 4 (Use cursor keys, and
then press ENTER button.)
Pan Assignment mode:
•
Parameter control 1 button centers pan or surround
angle.
•
Parameter control 2 button centers surround
diversity.
•
Parameter control 3 button centers surround LFE
level.
•
Parameter control 4 button resets spread.
Send Assignment mode:
•
Enables or disables Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
•
Conrms the plug-in selection for Insert slots 1 to
4 or 5 to 8, and enters Plug-in Edit mode for the
selected Insert slot.
Plug-In Edit mode:
•
Sets value to default, or switches buttons with two
states.
Moving virtual encoders 1 to 4 (Use cursor keys, and
then rotate parameter wheel.)
Pan Assignment mode:
•
Parameter control 1 edits pan or surround angle.
•
Parameter control 2 edits surround diversity.
•
Parameter control 3 edits surround LFE level.
•
Parameter control 4 edits spread.
Send Assignment mode:
•
Controls the Send level of Sends 1 to 4 or 5 to 8.
Plug-in Assignment mode:
•
Chooses Insert slot 1 to 4 or 5 to 8.
Plug-in Edit mode:
•
Sets value.