X

Chapter 22 Yamaha 01V96 237
01V96 Fader Mode controls
The table outlines the FADER MODE controls and their assignments.
Note: A modier button (such as SHIFT/ADD) below a control description indicates that the
control has an alternate use while the modier is held down. Modier buttons that need to be
assigned manually by the user are shown with an asterisk (*) that precedes the control name.
Control Modier Assignment
AUX 1 In Insert Display mode:
•
Assigns Send 1 level of channel
strips to encoders.
•
Assigns Send 1 level of the
selected channel strip to virtual
encoders.
•
Assigns Sends 1 to 4 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 1 to 4.
In Channel Display mode:
•
Assigns Send 1 level of channel
strips to encoders and virtual
encoders.
•
Shows current Send 1
destination assignment, when
button is held down.
*DAW SHIFT/ADD Same as AUX 5, but for Send 6.
AUX 2 Same as AUX 1, but for Send 2.
*DAW SHIFT/ADD Same as AUX 5, but for Send 7.
AUX 3 Same as AUX 1, but for Send 3.
*DAW SHIFT/ADD Same as AUX 5, but for Send 8.
AUX 4 Same as AUX 1, but for Send 4.
AUX 5 In Insert Display mode:
•
Assigns Send 5 level of channel
strips to encoders.
•
Assigns Send 5 level of the
selected channel strip to virtual
encoders.
•
Assigns Sends 5 to 8 of the
selected channel strip to virtual
encoders. Use the ENTER button
to switch the bypass state of
Sends 5 to 8.
In Channel Display mode:
•
Assigns Send 5 level of channel
strips to encoders and virtual
encoders.
•
Shows current Send 5
destination assignment, when
button is held down.