X

Chapter 22 Yamaha 01V96 236
01V96 Display Access controls
The table outlines the DISPLAY ACCESS controls and their assignments.
Note: A modier button (such as SHIFT/ADD) below a control description indicates that the
control has an alternate use while the modier is held down. Modier buttons that need to be
assigned manually by the user are shown with an asterisk (*) that precedes the control name.
Control Modier Assignment
*DAW AUTO STATUS While held down in Channel
Display mode, the display shows
the automation mode of the 16
channel strips in the current bank
selection.
PAIR/GROUP Enters Group Edit mode:
•
When a channel strip group
is selected, channel strip
membership is indicated by a
lit SEL button. Use this button
to enable/disable the channel
strip’s group membership.
•
Virtual encoders 1 to 4 display
properties of the currently
selected group.
•
Virtual encoder buttons 1 to 4
enable/disable properties of the
currently selected group.
•
When INSERT/PARAM is set to
PARAM, the left and right Tab
Scroll buttons scroll through
the group properties. When set
to INSERT, the buttons scroll
through the groups for editing.
*DAW SHIFT/ADD Switches the Mixer to show all
channel strips that correspond to
tracks used in the Tracks window,
along with their signal ow.
EFFECT Opens or closes the Sample Editor.