X

235
Set up your 01V96
Follow the steps below before using your 01V96 with Logic Pro.
•
Make sure that your 01V96 device is connected to the computer via USB.
•
Make sure that the latest USB MIDI driver for the device is installed. Visit the manufacturer’s
website to download the most recent driver version, if necessary.
Set up your 01V96 with Logic Pro
1 On the 01V96 front panel, do the following:
•
Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly, until the Setup > MIDI/Host page is
visible.
•
Use the cursor buttons to move the rst DAW parameter box in the SPECIAL FUNCTIONS
section, and rotate the parameter wheel to select USB and 1–2.
•
Press the DISPLAY ACCESS [REMOTE] button repeatedly, until the Setup > Remote page is
visible.
•
Rotate the parameter wheel to choose General DAW as the TARGET parameter.
•
Press the LAYER [REMOTE] button.
2 In Logic Pro:
When you open Logic Pro, the 01V96 device is installed automatically. You should see two 01V96
icons in the Setup window, aligned horizontally.
01V96 assignments
01V96 assignments overview
These sections outline the assignment of Yamaha 01V96 interface elements to Logic functions.
•
01V96 Display Access controls on page 236
•
01V96 Fader Mode controls on page 237
•
01V96 LCD controls on page 239
•
01V96 Selected Channel control on page 241
•
01V96 data entry controls on page 241
•
01V96 channel strips on page 242
•
01V96 assignable keys on page 243
Yamaha 01V96
22