X

Chapter 21 Tascam US-428 and US-224 234
Control Modier Assignment
Data wheel AUX 1 LED on: controls the Send 1
Level of the selected channel.
AUX 2 LED on: controls the Send 2
Level of the selected channel.
AUX 3 LED on: controls the Send 3
Level of the selected channel.
AUX 4 LED on: controls the Send 4
Level of the selected channel.
F3 LED on: data wheel is in Scrub
mode.
None of the above is lit: data
wheel is in Transport mode, and
moves the playhead in one-bar
increments.
ASGN Sets currently selected channel’s
output.
US-428 and US-224 Locate controls
The table outlines the Locate controls and their assignments:
Control Assignment
<< LOCATE Moves playhead to previous marker position.
LOCATE >> Moves playhead to next marker position.
SET Creates a new marker at the current playhead
position.
US-428 and US-224 Bank controls
The table outlines the BANK controls and their assignments:
Control Assignment
< BANK Shifts fader bank left by one bank. (A bank is a group
of channels.) The LED is lit if the leftmost fader bank
has not been reached.
BANK > Shifts fader bank right by one bank. The LED is lit if
the rightmost fader bank has not been reached.
US-428 and US-224 transport controls
The table outlines the transport controls and their assignments:
Control Assignment
REW Moves the playhead backward by one bar.
F FWD Moves the playhead forward by one bar.
STOP Stops playback.
PLAY Starts playback.
RECORD Begins recording.