X

Chapter 21 Tascam US-428 and US-224 232
US-428 and US-224 EQ controls
The table outlines the EQ controls and their assignments.
Note: A modier button (such as NULL) shown below a control description indicates that the
control has an alternate use while the modier is held down.
Control Modier Assignment
Gain Controls the Gain of the currently
selected EQ band (of chosen
channel).
Freq Controls the Frequency of the
currently selected EQ band (of
chosen channel).
Q Controls the Q Factor of the
currently selected EQ band (of
chosen channel).
HIGH Selects EQ band 3 (allowing use of
Gain, Freq, and Q controls for this
band).
ASGN Switches EQ band 3 bypass state.
HI-MID Selects EQ band 4 (allowing use of
Gain, Freq, and Q controls for this
band).
ASGN Switches EQ band 4 bypass state.
LO-MID Selects EQ band 5 (allowing use of
Gain, Freq, and Q controls for this
band).
ASGN Switches EQ band 5 bypass state.
LOW Selects EQ band 6 (allowing use of
Gain, Freq, and Q controls for this
band).
ASGN Switches EQ band 6 bypass state.