X

Chapter 21 Tascam US-428 and US-224 231
US-428 and US-224 channel strips
The table outlines the channel strip controls and their assignments.
Note: A modier button (such as NULL) shown below a control description indicates that the
control has an alternate use while the modier is held down.
Control Modier Assignment
MUTE 1 to 8 SOLO LED o: switches Mute on/
o; LED displays Mute state.
SOLO LED on: switches Solo on/o;
LED displays Solo state.
REC 1 to 8 LEDs Displays Record Enable state.
NULL On if fader is higher than actual
channel volume (in Logic Pro).
SELECT 1 to 8 LEDs Displays select status (of channel).
NULL On if fader is lower than actual
channel volume (in Logic Pro).
SELECT 1 to 8 buttons Selects channel.
REC Turns Record Enable on or o.
Fader 1 to 8 Controls channel volume.
NULL Allows you to update the fader
position to match the actual
volume (in Logic Pro).
Master fader Controls Master volume fader (or
Output 1 and 2, if no Master fader
channel exists in the project).