X

230
Set up your US-428 or US-224
Follow these steps to use your Tascam US-428 or US-224 control surface with Logic Pro.
Set up your Tascam US-428 or US-224 device in Logic Pro
1 Install the latest version of the driver software needed for the US-428 or US-224.
2 Ensure that your US-428 or US-224 units are connected to the computer via USB.
3 Open Logic Pro.
The unit is scanned for, and installed, automatically.
US-428 and US-224 assignments
US-428 and US-224 assignments overview
These sections outline the assignment of Tascam US-428 and US-224 interface elements to
Logic functions.
•
US-428 and US-224 channel strips on page 231
•
US-428 and US-224 EQ controls on page 232
•
US-428 and US-224 master controls on page 233
•
US-428 and US-224 Locate controls on page 234
•
US-428 and US-224 Bank controls on page 234
•
US-428 and US-224 transport controls on page 234
Note: The US-224 provides only four channel strips and transport controls and lacks the EQ and
Master sections (excluding the NULL button and data wheel) of the US-428. Many operations
listed in the linked sections are specic to the additional controls of the US-428 and cannot be
performed with the US-224.
Tascam US-428 and US-224
21