X

Chapter 20 Tascam US-2400 228
US-2400 master section controls
The table outlines the master section controls and their assignments.
Note: A modier button, such as SHIFT, below a control description indicates that the control has
an alternate use while the modier is held down.
Control Modier Assignment
MTR Switches encoder LED ring display
between two modes:
•
The value of the parameter (LED
o)
•
Level/peak hold meters (LED on)
In Level Meter mode, the LED
below the encoder displays signal
overloads (clipping).
F-KEY Modier key, used to switch the
function of other controls (see
“F-KEY” entries in center column).
NULL Sets Surround x/y or Panning
of selected channel to center
position; LED is on if Surround X
(or Panning) is centered.
F-KEY Resets overload display for level
meters.
Jog Wheel SCRUB o: moves playhead by
bars.
SCRUB on: scrubbing (of audio and
MIDI).
SCRUB ashing: Shuttle mode.
Joystick Edits Surround x/y or Panning of
selected channel.
SCRUB Switches Jog Wheel between
Move Playhead by Bars (LED o)
and Scrubbing (LED on) modes.
SHIFT Sets Jog Wheel to Shuttle mode
(LED ashes).
BANK – Shifts fader bank to the left by one
bank; LED is lit if the leftmost fader
bank has not been reached.
F-KEY Shifts fader bank to the left by one
channel.
BANK + Shifts fader bank to the right by
one bank; LED is lit if the rightmost
fader bank has not been reached.
F-KEY Shifts fader bank to the right by
one channel.