X

Chapter 20 Tascam US-2400 225
US-2400 master channel
The table outlines the master channel strip controls and their assignments:
Control Assignment
SEL Selects Master Output channel
strip if it exists; if not, Output
channel 1–2 is selected.
CLR SOLO Disables Solo for all tracks/
channels.
SHIFT Disables Mute for all tracks/
channels.
F-KEY Disables the Record Enable
buttons of all tracks/channels.
FLIP Switches Flip mode between O
(LED o) and Duplicate (LED on).
In this mode, the fader of each
channel strip mirrors the encoder
function.
SHIFT Sets Flip mode to Swap (LED
ashing). In this mode, the
parameters controlled by the fader
and encoder are swapped.
F-KEY Sets Flip mode to Zero—fader
motors are disabled (LED ashing).