X

Chapter 19 Tascam FW-1884 219
Mode controls (FW-1082 only)
The table outlines the mode controls and their assignments:
Note: If a modier button, such as SHIFT, is shown below a button description, it indicates that
the control has an alternate use while the modier is held down.
Control Modier Assignment
F1 Saves the active project. The
button LED is lit if the project has
been edited since the last Save
operation.
SHIFT Opens the Save As dialog.
F2 Performs an Undo of the last
editing operation. The button LED
is lit when a Redo is possible.
SHIFT Performs a Redo.
F3 Copies the current selection (of
regions or events) to the Clipboard.
SHIFT Cuts the current selection and
places it on the Clipboard.
F4 Pastes the Clipboard contents.
SHIFT Clears the current selection.
Master controls (FW-1884, FE-8, FW-1082)
The table outlines the master controls and their assignments.
Note: If a modier button, such as SHIFT, is shown below a button description, it indicates that
the control has an alternate use while the modier is held down.
Control Modier Assignment
Cursor buttons Identical to (but independent of)
the computer keyboard arrow
keys, except when encoders are
in EQ, Plug-in, or Instrument Edit
mode.
SHIFT Horizontally or vertically zoom in
and out (of the window with key
focus).
SHTL Enables Shuttle mode for the
wheel.
Wheel Shuttle mode o: moves playhead
by one bar. Shuttle mode on:
shuttles playhead.
Bank LEDs Shows currently selected fader
bank. If you only have an FW-1884,
a bank refers to eight channels. If
you have FE-8 extensions added,
a bank encompasses the total
number of (physical) channel
strips: 16, 24, and so on. If no LED is
lit, bank 5 or higher is selected.