X

Chapter 19 Tascam FW-1884 215
Encoders and controls (FW-1082 only)
The three buttons at the bottom of this control surface section determine the mode of other
controls:
•
EQ/Pan mode: The controls apply to a certain EQ band of the selected channel.
•
AUX 1–4 mode: The controls apply to Sends 1–4.
•
AUX 5–8 mode: The controls apply to Sends 5–8.
Note: If a modier button, such as SHIFT, is shown below a button description, it indicates that
the control has an alternate use while the modier is held down.
Mode Modier Assignment
REC While REC is held down, the SEL
buttons activate or deactivate
Record Enable for the channel
strip.
EQ GAIN–AUX 1/5
•
EQ/PAN mode: edits the Gain of
the currently selected EQ band.
•
AUX 1–4 mode: controls Send
1 level.
•
AUX 5–8 mode: controls Send
5 level.
SET Selects the channel strip input.
EQ FREQ–AUX 2/6
•
EQ/PAN mode: edits the
Frequency of the currently
selected EQ band.
•
AUX 1–4 mode: controls Send
2 level.
•
AUX 5–8 mode: controls Send
6 level.
SET Selects the channel strip output.
EQ Q–AUX 3/7
•
EQ/PAN mode: edits the Q
Factor of the currently selected
EQ band.
•
AUX 1–4 mode: controls Send
3 level.
•
AUX 5–8 mode: controls Send
7 level.
SET Selects the channel strip input
format.
PAN–AUX 4/8
•
EQ/PAN mode: edits Pan.
•
AUX 1–4 mode: controls Send
4 level.
•
AUX 5–8 mode: controls Send
8 level.