X

210
Set up FW-1884, FE-8, or FW-1082
The Tascam FW-1884, the FE-8 extension, and the FW-1082 can control Logic Pro. The Tascam FE-8
extension can be used to expand the FW-1884 with eight additional channel strips. Up to 15 FE-8
units can be added to the FW-1884 system. The Tascam FW-1082 is a stripped-down version of
the FW-1884.
Note: This is an addendum to the Tascam user documentation and is limited to descriptions of
features specic to Logic Pro. Refer to the Tascam documentation for more information about the
individual control surfaces.
Follow the steps below to use your device with Logic Pro.
Set up your Tascam device with Logic Pro
1 Set up your device as described in the Tascam user documentation.
2 Install the latest OS X driver software and rmware on your computer. Visit the Tascam website to
download the most recent versions, if necessary.
3 Open Logic Pro.
Your control surface automatically connects to the application.
FW-1884 assignments
FW-1884 assignments overview
Assignments of Tascam FW-1884 interface elements to Logic functions are covered in
these sections.
Note: The relevant devices are highlighted in the heading of each section.
•
Encoders (FW-1884, FE-8) on page 211
•
Shortcut controls (FW-1884 only) on page 212
•
Channel strips (FW-1884, FE-8, FW-1082) on page 213
•
EQ controls (FW-1884 only) on page 214
•
Encoders and controls (FW-1082 only) on page 215
•
Automation controls (FW-1884 only) on page 218
•
Mode controls (FW-1082 only) on page 219
•
Master controls (FW-1884, FE-8, FW-1082) on page 219
Tascam FW-1884
19