X

Chapter 18 Roland SI-24 206
SI-24 status mode controls
The table outlines the status mode controls and their assignments.
Note: A modier button (such as SHIFT) shown below a button description indicates that the
button has an alternate use while the modier is held down.
Control Modier Assignment
AUTOMIX Sets STATUS 1 to 12 buttons to
Automation mode.
SHIFT Sets all tracks to O, Read, Latch,
or Write automation mode.
Repeatedly press this button
combination to cycle through
automation modes.
REC/PLAY Sets STATUS 1 to 12 buttons to
Record Enable mode.
SOLO Sets STATUS 1 to 12 buttons to
Solo mode.
MUTE Sets STATUS 1 to 12 buttons to
Mute mode.
SI-24 channel assign controls
The table outlines the channel assign controls and their assignments.
Note: A modier button (such as SHIFT) shown below a button description indicates that the
button has an alternate use while the modier is held down.
Control Modier Assignment
INPUT Shows the rst 12 audio input
channel strips.
SHIFT Shows the rst 12 MIDI channel
strips.
OUTPUT Shows the rst 12 output channel
strips:
•
1: Output 1–2 (default surround
assignment: front)
•
2: Output 3–4 (default surround
assignment: rear)
•
3: Output 5 (default surround
assignment: center)
•
4: Output 6 (default surround
assignment: LFE)
•
5: Output 7–8 (digital out)
SHIFT Shows the rst 12 audio channels.
BUS Shows the rst 12 aux channels.
SHIFT Shows the rst 12 instrument
channels.
Tr 1 to 12 Switches to Tracks view and shows
the rst 12 channels.
Tr 13 to 24 Switches to Tracks view and
displays channel 13 to 24.