X

Chapter 18 Roland SI-24 204
SI-24 channel strips
The table outlines the channel strip controls and their assignments.
Note: A modier button (such as SHIFT) shown below a button description indicates that the
button has an alternate use while the modier is held down.
Control Modier Assignment
EQ ON/OFF 1 to 4 In Pan mode:
•
Switches the bypass state of EQ
bands 1–4.
•
Enters EQ/Send mode. If no
Channel or Linear Phase EQ is
present on the selected channel,
a Channel EQ is automatically
inserted.
In EQ/Send mode:
•
Switches the bypass state of EQ
bands 1–4. The button LED is lit
when the EQ is enabled.
In Plug-in mode:
•
Switches between Inserts 1–4.
A lit button LED indicates the
selected Insert slot.
•
If a plug-in window is open, it
updates to reect the plug-in
parameters of the selected
Insert slot.
SHIFT In EQ/Send mode: Enables or
disables Send 1–4 Mute.
EQ/SEND Switches Channel views between:
•
EQ/Send Edit mode (LED on).
•
Pan Edit mode (LED o).
PLUG-IN Switches Channel views between:
•
Plug-in Edit mode (LED on).
(Plug-in window opens.)
•
Pan Edit mode (LED o).
Plug-in window closes when
Plug-in Edit mode is exited.
SHIFT Switches Channel views between:
•
Instrument Edit mode (LED on).
(Instrument window opens.)
•
Pan Edit mode (LED o).
Instrument plug-in window closes
when Instrument Edit mode is
exited.