X

203
Set up your SI-24
Follow the steps below before using your control surface with Logic Pro.
Use both the audio and MIDI controller features of the SI-24
m Ensure that your SI-24 units are connected to the RPC card with the (included) cable. This
connector provides both digital audio and MIDI connections.
m Make sure that the appropriate driver software is installed and functioning correctly.
Note: The RPC card is a PCI device and is not compatible with (most) G5, and all Intel-based Mac
computers, which only oer PCIe interfacing.
Use the SI-24 as a control surface
m Connect the unit bidirectionally with two free (not used by other devices) MIDI interface ports.
When used as a control surface, the SI-24 can be used with all Mac systems that are capable of
running Logic Pro. You will require another device for audio input and output.
Scan for your Roland SI-24 unit
1 Choose Logic Pro > Control Surfaces > Setup.
2 Choose Install from the New menu.
3 Select Roland SI-24 in the Install window.
4 Click the Scan button.
Logic Pro scans for, and automatically installs, your control surface.
SI-24 assignments
SI-24 assignments overview
These sections outline the assignment of Roland SI-24 interface elements to Logic functions.
•
SI-24 channel strips on page 204
•
SI-24 status mode controls on page 206
•
SI-24 channel assign controls on page 206
•
SI-24 surround/pan controls on page 207
•
SI-24 numeric key controls on page 208
•
SI-24 transport controls on page 209
Roland SI-24
18