X

Chapter 16 Radikal Technologies SAC-2K 200
SAC-2K transport controls
The table outlines the transport controls and their assignments.
Note: A modier button, such as SHIFT, below a button description indicates that the button has
an alternate use while the modier is held down.
Control Modier Assignment
<< Shuttles backward.
>> Shuttles forward.
SHIFT Goes to next marker.
STOP Stops playback (or recording).
PLAY Starts playback.
SHIFT Enables or disables Cycle mode.
RECORD Starts recording (to record-enabled
tracks).
SHIFT Enables or disables Replace mode.
SAC-2K Channel view controls
The table outlines the Channel view controls and their assignments:
Control Assignment
EQs Enters Channel view EQ Edit mode. Pressing the
button repeatedly cycles through all available EQ
parameter pages.
Inserts/Sends Enters Channel view Plug-in Edit mode and edits the
eect plug-in inserted into the currently chosen Insert
slot (of the selected channel). Pressing the button
repeatedly cycles through all available eect plug-in
parameter pages.
Dynamics —
MIDI —
Instrument Enters Channel view Instrument Edit mode and edits
the instrument plug-in inserted into the selected
(Instrument) channel. Pressing the button repeatedly
cycles through all available instrument plug-in
parameter pages.
SAC-2K troubleshooting
This section may help you to resolve a few common problems.
•
Track or channel names are shorter than necessary, and the assignments don’t work correctly
The SAC-2K is in an Emulation mode (Logic Control or HUI, for example). To resolve this issue,
turn the SAC-2K power o, and then back on.
•
The faders don’t work, and the locator display shows “00000000”
You have manually switched the SAC-2K to SLAVE mode. This has the unfortunate side eect
of not initializing a number of settings required for proper communication. To resolve this
issue, turn the SAC-2K power o, and then back on.