X

Chapter 16 Radikal Technologies SAC-2K 197
Control Modier Assignment
Group Switches to Group editing mode:
•
Encoder 1 to 10 push buttons
edit a group property. (The
property is shown in the LCD’s
lower line.)
•
Encoder 11 scrolls through
group properties.
•
Encoder 12 selects a group to
edit. Its name is displayed in the
lower LCD line, above Encoder
12.
•
Select buttons 1 to 8 activate/
deactivate group membership
of the channel.
1 to 8 Shifts the fader bank (a group of
channels or parameters) to the left
by one bank.
9 to 16 Shifts the fader bank to the right
by one bank.
17 to 24 Shifts the fader bank to the left by
one channel.
25 to 32 Shifts the fader bank to the right
by one channel.