X

Chapter 16 Radikal Technologies SAC-2K 195
SAC-2K Mixer view controls
The table outlines the Mixer view controls and their assignments.
Note: A modier button, such as SHIFT, below a button description indicates that the button has
an alternate use while the modier is held down.
Control Modier Assignment
Pan Switches to Mixer view
(multichannel) pan editing.
Encoders 9 to 12 edit Pan/Angle,
Diversity, LFE, and Spread of
selected channel (in Surround
mode).
High, HiMid, LowMid, Low Switches to Mixer view
(multichannel) gain editing of a
certain EQ band. Encoders 9 to 12
edit Frequency, Gain, Q factor, and
On/O for the selected channel.
Pressing and releasing the button
chooses a specic EQ band. While
held down, you can use Encoder
9 to choose the EQ band that you
want to edit (bands 1 to 8). The
button’s LED is lit when in Mixer
view Gain Editing mode (of the
selected channel EQ band).
•
Low: Band 3 (rst parametric EQ
band)
•
LowMid: Band 4 (second
parametric EQ band)
•
HiMid: Band 5 (third parametric
EQ band)
•
High: Band 6 (fourth parametric
EQ band)
Snd/Ins Switches the four Snd/Ins (1 to 4)
buttons between Send and Insert
modes.
•
LED o: Send mode
•
LED on: Insert mode