X

Chapter 16 Radikal Technologies SAC-2K 194
SAC-2K channel strips
The table outlines the channel strip controls and their assignments.
Note: A modier button, such as SHIFT, below a button description indicates that the button has
an alternate use while the modier is held down.
Control Modier Assignment
Mute/Solo Switches Mute/Solo 1 to 8 buttons
between Mute and Solo modes.
LED o: Mute/Solo buttons switch
Mute state on/o. LED on: Mute/
Solo buttons switch Solo state on/
o. LED ashes: Mute/Solo buttons
switch Record Enable state on/o.
SHIFT Sets Mute/Solo buttons to Record
Enable mode.
Mute/Solo 1 to 8 Mute/Solo LED o: Enables or
disables Mute; LED displays Mute
state. Mute/Solo LED on: Enables
or disables Solo; LED displays Solo
state. Mute/Solo LED ashing:
Enables or disables Record Enable;
LED displays Record Enable
(armed/disarmed) state.
SELECT 1 to 8 buttons Selects channel. Exception: In
Group mode, these buttons dene
group membership of the channel.
Master Select button Switches Flip mode between O
and Duplicate.
Faders 1 to 8 Controls volume, or duplicates the
parameter assigned to the encoder
above (if Flip mode is enabled).
Master Fader Controls the Master Level fader
if it exists; if not, controls Output
1–2 level.
EQ button Inserts a Channel EQ in the
channel if no Channel or Linear
Phase EQ is present.