X

Chapter 16 Radikal Technologies SAC-2K 193
SAC-2K LCDs and encoders
The table outlines the LCDs and encoder controls and their assignments:
Control Assignment
Left and middle LCDs Upper row displays the channel number when in a
Mixer (multichannel) view. The parameter name is
shown when in a (single) Channel view. Lower row
shows the parameter value of the corresponding
encoder (the one directly below the display). Level
meters are shown to the right.
Right LCD Upper row displays the name of the parameter
being edited with the corresponding encoder (the
one below). Lower row displays the parameter value
(assigned to the encoder below the display). The
Master Output level meter is displayed at the far right.
Encoders Edit the corresponding parameter shown in the LCD.
Encoder push buttons Parameters with two values (On/O): Switches
between the two values. Parameters that access items
(plug-in selection, for example): Conrms preselection.
At other times, sets the parameter to its default value.