X

192
Set up your SAC-2K
Make sure that your control surface is connected bidirectionally with the computer, using either
a MIDI interface or the unit’s USB connector. If the units are connected via USB, ensure that the
appropriate MIDI driver for the device is installed. Visit the manufacturer’s website to download
updated drivers, if necessary.
Set up SAC-2K units
1 Choose Logic Pro > Control Surfaces > Setup.
2 Choose Install from the New menu.
3 Select the SAC-2K in the Install window.
4 Click the Scan button.
SAC-2K assignments
SAC-2K assignments overview
This section outlines the assignment of the Radikal Technologies SAC-2K interface elements to
Logic functions.
•
SAC-2K LCDs and encoders on page 193
•
SAC-2K channel strips on page 194
•
SAC-2K Mixer view controls on page 195
•
SAC-2K software navigation controls on page 198
•
SAC-2K locator display on page 198
•
SAC-2K marker controls on page 199
•
SAC-2K transport controls on page 200
•
SAC-2K Channel view controls on page 200
Radikal Technologies SAC-2K
16