X

Chapter 15 Mackie C4 191
C4 Parameter, Track, and Slot buttons
The buttons at the lower right of the C4 are used to access channel strips, channel strip elements,
and parameters.
•
BANK Left and BANK Right buttons: Shifts the parameter display by one page (a group of
parameters) in particular views.
•
SINGLE Left and SINGLE Right buttons: Shifts the parameter display by one parameter in
particular views.
•
TRACK L and TRACK R buttons: In Mixer view, TRACK L and TRACK R shift the fader bank left or
right by the number of channel strips in the control surface group. For example, if you have
two C4 units in a control surface group, the view shifts by 16 channels.
Simultaneously pressing TRACK L or TRACK R and OPTION moves to the rst or last group
of channels in the project (or parameter pages, if in an edit mode). For example, if you are
viewing the rst 8 channels (of 64) in the fader bank, pressing OPTION and TRACK L or TRACK
R will show the last 8 channels in the fader bank (channels 57 to 64).
In Channel view, TRACK L and TRACK R select the previous or next channel.
In Channel view, simultaneously pressing TRACK L or TRACK R and SHIFT moves to the rst or
last group of channels in the project (or parameter pages, if in an edit mode), but only aects
the Split Lower group if Split mode is active.
•
SLOT UP and SLOT DOWN buttons: Selects the required EQ, Send, or Insert slot.