X

Chapter 15 Mackie C4 188
C4 Marker overlay
The Marker overlay is active when the MARKER button light is on.
•
V-Selects 1 to 30 are assigned to markers 1 to 30. The upper LCD line shows the marker name;
the lower line displays INSIDE when the playhead falls within marker boundaries.
•
V-Select 31 creates a new marker.
•
V-Select 32 deletes the current marker.
C4 Track overlay
The Track overlay is active when the TRACK button light is on.
Select a track/channel for Split Upper
m Press V-Select 1 to 32. When a track/channel is selected for Split Upper, the bottom LCD displays
the word UPPER.
m BANK Left/BANK Right shifts the fader bank by the number of channels in the control
surface group.
m SINGLE Left/SINGLE Right shifts the fader bank by one channel.
Select a track/channel for Split Lower
m Press V-Select 1 to 32. If a track/channel is selected for Split Lower, the word LOWER is shown in
the bottom LCD.
m BANK Left/BANK Right shifts the fader bank by the number of channels in the control
surface group.
m SINGLE Left/SINGLE Right shifts the fader bank by one channel.
C4 Channel Strip overlay
The Channel Strip overlay is active when the CHAN STRIP button light is on.
•
V-Pot/V-Select row 1 (V-Pots 1 to 8) edits the frequency and gain of EQ bands 3 to 6 (the
parametric bands), provided an EQ eect is inserted in the current channel strip.
•
V-Pot/V-Select row 2 (V-Pots 9 to 16) switches to Eect Edit mode for Inserts 1 to 8, provided
an eect is inserted in the respective Insert slot. If no eect is inserted, turn the respective
V-Pot to select an eect, then press the V-Select, to insert it.
•
V-Pot/V-Select row 3 (V-Pots 17 to 24) edits Send 1 to 8 Level, provided the current channel
has active sends.
•
V-Pot/V-Select 25 switches to Instrument Edit mode, provided the selected channel is routed
to an instrument channel, and an instrument plug-in is inserted.
•
V-Pot/V-Select 26 edits the channel output destination.
•
V-Pot/V-Select 27 sets the automation mode.
•
V-Pot/V-Select 28 edits group membership.
•
V-Pot/V-Select 29 edits volume.
•
V-Pot/V-Select 30 edits pan/surround angle (for surround channels).
•
V-Pot/V-Select 31 edits surround diversity.
•
V-Pot/V-Select 32 sets the channel input format.