X

Chapter 15 Mackie C4 186
C4 function buttons
This section outlines the FUNCTION buttons at the lower left of the C4 control surface.
•
SPLIT button: Splits the C4 rows as follows: 4/0, 1/3, 2/2, and 3/1. This is known as a Split Edit,
and allows you to simultaneously edit two separate sections of a plug-in, or even two dierent
plug-ins.
Split Edit is also possible across multiple C4 units. For example, with two C4 devices, pressing
the SPLIT button oers the following split modes:
•
1/7 (Split Upper is the top row of therst C4 unit; Split Lower is the bottom three rows of the
rst unit and all rows of the second C4 unit. LED 1/3 is lit.)
•
2/6 (Split Upper is the top two rows of the rst C4 unit; Split Lower is the bottom two rows
of the rst unit and all rows of second C4 unit. LED 2/1 is on.)
•
3/5 (LED 3/1 is on.)
•
4/4 (All three LEDs are on.)
•
5/3 (All three LEDs are on.)
•
6/2 (All three LEDs are on.)
•
7/1 (All three LEDs are on.)
•
LOCK button: Turns Track Lock on or o. When LOCK is enabled, selection of a dierent track in
the Tracks window does not switch the current track/channel selection on the C4.
•
SPOT ERASE button: Unassigned.