X

Chapter 15 Mackie C4 184
Use Instrument Assign Mixer view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2 Press V-Select 22 (labeled Instru Mixer).
In Instrument Assign Mixer view, the C4 displays the Instrument slots of the selected
instrument channels.
•
Turn a V-Pot to select an instrument. (This action lets you browse through the software
instruments listed in the Instrument Plug-in menu, shown in Logic Pro instrument channels.)
•
Press the respective V-Select to insert the chosen instrument. This enters Instrument Edit view,
where you can edit instrument parameters.
•
The TRACK L and TRACK R buttons shift the fader bank by the number of channel strips in the
control surface group.
•
Holding down SHIFT and pressing a V-Select switches the bypass state of the respective
Instrument slot. An asterisk (*) precedes the name of bypassed instruments.
Use Instrument Edit view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2 Press V-Select 22 (labeled Instru Mixer).
3 Insert or select an instrument, which automatically switches the C4 to Instrument Edit view.
In Instrument Edit View:
•
V-Pots 1 to 32 constitute a group of 32 parameters. Splitting is possible (see C4 function
buttons on page 186).
•
BANK Left/BANK Right shifts the edited parameters by one page.
•
In Split mode, the BANK button behaviors apply to Split Upper.
•
When holding down SHIFT, the BANK button behaviors apply to Split Lower.
•
SINGLE Left/SINGLE Right shifts the edited parameters by 1.
•
In Split mode, the SINGLE button behaviors apply to Split Upper.
•
When holding down SHIFT, the SINGLE button behaviors apply to Split Lower.