X

Chapter 15 Mackie C4 182
Use EQ Mixer view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 19 (labeled EQ Mixer).
In EQ Mixer view:
•
Row 1 sets the selected EQ band bypass state.
•
Row 2 edits the selected EQ band frequency.
•
Row 3 edits the selected EQ band gain/slope.
•
Row 4 edits the selected EQ band Q factor.
•
The SLOT UP and SLOT DOWN buttons select the EQ band (if a Channel or Linear Phase EQ is
inserted in the selected channel strip).
Use EQ Channel view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 27 (labeled EQs).
In EQ Channel view:
•
Row 1 edits the frequency of all eight bands.
•
Row 2 edits the gain/slope of all eight bands.
•
Row 3 edits the Q factor of all eight bands.
•
Row 4 sets the bypass state of all eight bands.
If no Channel or Linear Phase EQ is present on the selected channel, a Channel EQ is
automatically inserted when you enter EQ Channel view. The TRACK Left and TRACK Right
buttons switch to the previous or next channel. If you switch to a channel with no Channel or
Linear Phase EQ inserted, the C4 displays show “–”, and the corresponding V-Pots do nothing.
Use Send Mixer view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels appear on the C4 displays.
2 Press V-Select 20 (labeled Sends Mixer).
In Send Mixer view:
•
Row 1 edits the send destination of the selected Send slot (on the selected channel).
•
Row 2 edits the send level.
•
Row 3 edits the send position (pre/post fader).
•
Row 4 mutes/unmutes the send.
•
The SLOT UP/SLOT DOWN buttons select the Send slot.
•
The TRACK L and TRACK R buttons shift the fader bank (to the left or right) by the number of
channel strips in the control surface group.
Use Send Channel view
1 Hold down the CHAN STRIP button.
The channel strip overlay labels are shown on the C4 displays.
2 Press V-Select 28 (labeled Sends).