X

Chapter 14 Mackie HUI 169
HUI DSP controls
The table outlines the DSP controls and their assignments.
Note: A modier button, such as SHIFT, below a button description indicates that the button has
an alternate use while the modier is held down.
Control Modier Assignment
ASSIGN —
COMPARE
Switches DSP display between
“track name/parameter name” and
“parameter name/parameter value”
modes.
BYPASS Switches the bypass state of the
plug-in being edited.
DSP Select 1 to 4
•
Assignment Pan mode:
DSP Select 1 resets pan or
surround angle.
DSP Select 2 resets surround
diversity.
DSP Select 3 resets surround
LFE (level).
DSP Select 4 resets the Spread
parameter.
•
Assignment Send mode:
Activates or deactivates Sends 1
to 4, or mutes 5 to 8.
•
Eect Assign mode:
Conrms Insert 1 to 4 or 5 to
8 eect selection, selects this
Insert slot, and enters Eect Edit
mode, showing the parameters
of the chosen eect.
•
Eect Edit mode:
Sets parameter to the default
value, or turns “switching”
parameters on/o.
DSP V-Pots
•
Assignment Pan mode:
DSP V-Pot 1 controls pan or
surround angle.
DSP V-Pot 2 controls surround
diversity.
DSP V-Pot 3 controls surround
LFE (level).
DSP V-Pot 4 controls the Spread
parameter.
•
Assignment Send mode:
Controls Send 1 to 4, or 5 to 8
Levels.
•
Eect Assign mode:
Assigns eects to Insert slots 1
through 4, or 5 to 8.
•
Eect Edit mode:
Controls the selected eect
parameter.