X

Chapter 14 Mackie HUI 167
HUI channel strips
The table outlines the channel strip controls and their assignments.
Note: A modier button, such as SHIFT, below a button description indicates that the button has
an alternate use while the modier is held down.
Control Modier Assignment
Level meters Displays momentary and peak
levels.
REC/RDY Activates or deactivates the Record
Enable button.
OPTION/ALL Disables the Record Enable
buttons of all channel strips.
INSERT
•
BYPASS button OFF (see Insert
Select mode in HUI assign
controls
on page 164): selects
channel strip for plug-in
selection.
•
BYPASS button ON: Enables or
disables bypass of currently
selected Insert slot.
V-SEL
•
PAN button ON: sets Pan
parameter to center position if
DEFAULT button is on.
•
Send 1 to 8 selected: edits Send
Pre/Post, turns Send Mute on or
o, or sets Send Level to default
value.
•
In Send Destination Assignment
mode, Channel Strip Input
or Channel Strip Output
Assignment mode: the V-SEL
buttons conrm your selection.
V-Pot Adjusts parameter selected in the
ASSIGN section.
AUTO Cycles through automation modes.
If you hold down an automation
mode button, pressing AUTO sets
this mode.
SOLO Enables or disables the Solo
button.
OPTION/ALL Disables the Solo buttons of all
channel strips.
MUTE Enables or disables the Mute
button.
OPTION/ALL Disables the Mute buttons of all
channel strips.
Scribble strip Displays the channel strip name or
send, input, or output assignment.
SELECT Selects the channel strip.
SHIFT/ADD Sets volume to unity level.