X

Chapter 14 Mackie HUI 165
Control Modier Assignment
BYPASS Switches the INSERT buttons
between Insert Select and Insert
Bypass modes. See the Insert
entry in the table on HUI channel
strips
on page 167.
MUTE Switches the V-Select buttons
between Send Position and Send
Mute modes.
SHIFT Enables or disables Flip mode.
SELECT-ASSIGN Displays the V-Pot assignment as
follows: Pan, Snd1 to Snd8, S1As to
S8As, In, Out.
SUSPEND —
DEFAULT Hold down this button to switch
the V-Select buttons between
standard operation and setting
default values.
ASSIGN When V-Pots display a send level,
the ASSIGN button switches them
to Send Destination Assignment
mode (choosing a bus, in other
words). Press the V-Select
to conrm the assignment.
The DSP V-Pots display the
assignments of Send slots 1–4
or Send slots 5–8. Conrm any
changes by pressing the V-Select
button or all changes will be lost
when you leave Send Destination
Assignment mode, or press the
Assign button a second time.
HUI fader bank buttons
The table outlines the fader bank controls and their assignments:
Control Assignment
Bank Left Shifts channel strips by one bank (a group of channel
strips or parameters) to the left.
Bank Right Shifts channel strips by one bank to the right.
Channel Left Shifts channel strips by one channel (or parameter) to
the left.
Channel Right Shifts channel strips by one channel to the right.