X

Chapter 12 Korg microKONTROL and KONTROL49 156
The controls in the main section have the following meaning:
Control Assignment
Main encoder Controls the playhead in one of three modes. (See
Pads 1–3 in Transport mode on page 153.)
SETTING Held down in Send mode:
•
Main encoder chooses the current send.
•
Pads have special meaning—see Send mode on
page 154 .
•
LCDs display send destinations.
•
Encoders choose send destinations.
Held down in Eect Edit mode:
•
Main encoder chooses the current Insert slot.
•
Pads have special meaning—see Eect edit
mode
on page 155.
•
LCDs display eect names for all eight channels.
MESSAGE Enables or disables Duplicate Flip mode. When
enabled, both the faders and encoders control the
parameter displayed in the LCDs.
SCENE While held down, Pads switch between Pad functions
and channel views. See microKONTROL and
KONTROL49 Pads overview
on page 153.
EXIT —
HEX LOCK Shifts fader bank to the previous eight channels. (LED
is on if previous channels exist.) Shifts fader bank
to the previous eight parameters in Eect Edit or
Instrument Edit view.
ENTER Shifts fader bank to the next eight channels. (LED is
on if subsequent channels exist.) Shifts fader bank to
the next eight parameters in Eect Edit or Instrument
Edit view.
< Octave Shift Down
> Octave Shift Up