X

Chapter 12 Korg microKONTROL and KONTROL49 155
Eect edit mode
This mode is enabled by pressing SCENE and Pad 13. In Eect edit mode, the channel strip
encoders control the parameters of the currently selected eect. The Pads remain in the currently
selected mode.
•
Eect Edit Overlay: Press SETTING while the encoders are in Eect Edit mode to change the
operation of the Pads in Eect edit mode.
Pad Assignment
1–8 Switches the eect bypass state (of the currently
selected Insert slot) for the eight channel strips.
microKONTROL and KONTROL49 main controls
The main LCD shows information on the current mode of the encoders.
Display text Meaning
<Instrument name> Encoders edit instrument parameters.
<Plug-in name> Encoders edit eect parameters (the currently
selected Insert slot number is indicated on the
display).
Automatn Encoders set the automation mode.
Ins. x (SETTING held down) Main encoder chooses the
Insert slot number.
ModePad Displayed while SCENE button is held down.
Pan Encoders control pan.
Send x Encoders control send level of send x.
User 6 Channel Strip User Mode 6. Encoders are initially
unassigned.
User 7 Channel Strip User Mode 7. Encoders are initially
unassigned.
User 8 Channel Strip User Mode 8. Encoders are initially
unassigned.
The LCD backlight is red while recording, and green at other times.