X

Chapter 12 Korg microKONTROL and KONTROL49 153
microKONTROL and KONTROL49 assignments
microKONTROL and KONTROL49 Pads
microKONTROL and KONTROL49 Pads overview
The Pads can operate in one of eight modes, and three overlays. While pressing SCENE, you can
select modes for the Pads and channel strips. Releasing SCENE without pressing a Pad does not
aect the currently selected Pad or channel views.
Pad Assignment
1 Switches Pads to Transport mode.
2 Switches Pads to Solo/Mute mode.
3 Switches Pads to Rec/Select mode mode.
4–8 Switches Pads to Use the User 4–8 modes.
These modes have unassigned Pads. You can assign
them to key commands with the Learn function.
9 Switches channel strips to Pan mode.
10 Switches channel strips to Send mode.
11 Switches channel strips to Automation mode.
12 Switches channel strips to Instrument edit mode.
13 Switches channel strips to Eect edit mode.
14–16 Switches channel strips to User 6–8 mode.
These modes have unassigned encoders. You can
assign them with the Logic Pro Learn function.
Transport mode
This mode is enabled by pressing SCENE and Pad 1.
Pad Assignment
1 Sets main encoder to Transport mode.
2 Sets main encoder to Scrub mode.
3 Sets main encoder to Shuttle mode.
7 Switches sync between internal and external.
8 Enables or disables metronome click (separately for
Playback and Record).
9 Enables or disables Cycle mode.
10 Enables or disables Autopunch mode.
11 Enables or disables Replace mode.
12 Enables or disables Solo.
13 Record
14 Pause
15 Play
16 Stop