X

Chapter 9 JLCooper CS-32 MiniDesk 145
CS-32 MiniDesk F keys
The table outlines the F key controls and their assignments:
Note: If a modier button, such as SHIFT, is shown below a description, it indicates that the
control has an alternate use while the modier is held down.
Control Modier Assignment
SHIFT Modier for function of other
controls. See SHIFT entries in left
column.
F1 While held down, MUTE buttons
1–6 enable/disable automation of
certain parameters (see MUTE).
SHIFT Enables or disables Cycle mode.
F2 While held down, MUTE buttons
set automation mode to Read.
SHIFT Enables or disables Autopunch
mode.
F3 While held down, MUTE buttons
set automation mode to Touch.
SHIFT Sets left locator by current
playhead position.
F4 While held down, MUTE buttons
set automation mode to Latch.
SHIFT Sets right locator by current
playhead position.
F5 While held down, MUTE buttons
set automation mode to Write.
SHIFT Sets punch in locator by current
playhead position.
F6
SHIFT Sets punch out locator by current
playhead position.
F7 Sets pots to Pan/Send mode
(display shows “PA”).
SHIFT Enables or disables metronome
click.
F8 Sets pots to Instrument Edit mode
(display shows “In”).
F9 Sets pots to Eect Edit mode
(display shows “P1”–“P9”).