X

140
Set up your CS-32 MiniDesk
Follow the steps below to use your JLCooper CS-32 MiniDesk control surface with Logic Pro.
Add JLCooper CS-32 control surfaces connected via USB
1 Install the software that comes with the CS-32.
2 Ensure that the CS-32 is in Host mode.
3 Make sure that your CS-32 units are connected to the computer via USB.
USB units are installed automatically when you open Logic Pro.
Add JLCooper CS-32 control surfaces connected via MIDI
1 Install the software that comes with the CS-32.
2 Ensure that the CS-32 is in Host mode.
3 Make sure that your CS-32 units are connected to the computer via MIDI.
4 Choose Logic Pro > Control Surfaces > Setup.
5 Choose Install from the Setup window’s New menu.
6 Select the CS-32 from the list in the Install window.
7 Click the Scan button.
CS-32 MiniDesk assignments
CS-32 MiniDesk assignments overview
Assignments of JLCooper CS-32 MiniDesk interface elements to Logic functions are covered in
these sections:
•
CS-32 MiniDesk display on page 141
•
CS-32 MiniDesk pots on page 142
•
CS-32 MiniDesk channel strips on page 143
•
CS-32 MiniDesk bank button on page 144
•
CS-32 MiniDesk F keys on page 145
•
CS-32 MiniDesk cursor controls on page 14 6
•
CS-32 MiniDesk transport controls on page 146
•
CS-32 MiniDesk Jog wheel controls on page 147
JLCooper CS-32 MiniDesk
9