X

Chapter 7 CM Labs Motormix 132
Motormix Solo and Mute buttons
These buttons switch the solo and mute state of the displayed channel.
Note: In modal dialogs, the SOLO and MUTE buttons generate the computer keyboard character
shown on the button face.
Motormix view controls
The table outlines the view controls and their assignments.
Note: If a modier button, such as SHIFT, is shown below a button description, it indicates that
the control has an alternate use while the modier is held down.
Control Modier Assignment
Left/right buttons In Eect and Instrument Plug-in
Edit modes: shifts the parameter
bank. In other modes:
•
If BANK LED is o: shifts the
fader bank by one channel.
•
If BANK LED is on: shifts the
fader bank by one bank (a
group of eight channels).
SHIFT In Eect and Instrument Plug-in
Edit modes: shifts the parameter
bank by one parameter. In Group
Edit mode, the group parameter
bank is shifted.
bank Switches mode of left/right
buttons (see above).
SHIFT Sets the Select buttons to Channel
View.
group Sets the Select buttons, rotary
encoders, and Multi buttons to
Group Edit mode.
SHIFT Displays channels’ group
assignments in the LCD. The rotary
encoders allow you to change
assignments.