X

Chapter 7 CM Labs Motormix 130
Motormix multi buttons
These buttons (labeled A to H) have multiple uses depending on the current mode, as indicated
by the green and yellow LEDs to the right.
Note: If a modier button, such as SHIFT, is shown below a button description, it indicates that
the control has an alternate use while the modier is held down.
Mode Modier Assignment
fx bypass Enables or disables bypass of the
currently selected insert eect.
SHIFT (e-1) Enables or disables bypass of the
currently selected EQ band, and
switches rotary encoders to EQ
frequency editing.
s-mute Enables or disables bypass of
the currently edited send, and
switches rotary encoders to send
level editing.
SHIFT (e-2) Enables or disables bypass of the
currently selected EQ band, and
switches rotary encoders to EQ
Gain editing.
pre/post Switches between Pre and Post
Fader modes of the currently
edited send, and switches rotary
encoders to send level editing.
Post mode is indicated by a lit LED.
SHIFT (e-3) Enables or disables the bypass of
the currently selected EQ band,
and switches rotary encoders to
(EQ) Q factor editing.
select Switches the rotary encoders
to Pan/Surround editing. The
parameter is chosen with the
rotary selector.
SHIFT (e-4) Switches the rotary encoders to
channel parameter editing.
Note: In modal dialogs, the Multi buttons generate the computer keyboard character shown on
the button face.