X

Chapter 7 CM Labs Motormix 126
Motormix assignments
Motormix Select buttons
The Select buttons (the buttons just below the LCD) have multiple uses, depending on the
current mode.
Note: If a modier button, such as SHIFT, is shown below a button description, it indicates that
the control has an alternate use while the modier is held down.
Mode Assignment
Normal Selects the channel displayed in the upper LCD line.
Channels can be shifted to the left and right with the
View left and right buttons.
Bank button LED ashing Channel View: Select buttons switch between
displayed channel strips:
•
1: Switches to Single view.
•
2: Switches to Arrange view.
•
3: All view, MIDI channels
•
4: All view, input channels
•
5: All view, audio channels
•
6: All view, instrument channels
•
7: All view, aux and bus channels
•
8: All view, output and master channels
WINDOW/tool button LED on Window Select mode: Select buttons open, assign key
focus, or close a particular window type. LED o: If the
window is not open, the button opens it. LED on: If
the window is open but does not have key focus, the
button activates it. LED ashes: If the window has key
focus, the button closes it.
•
1: Tracks window
•
2: Mixer
•
3: Event List
•
4: Score Editor
•
5: Step Editor
•
6: Piano Roll Editor
•
7: Control bar
•
8: Audio Bin
WINDOW/tool button ashes Select Tool mode: Select buttons choose a tool.
•
1: Pointer
•
2: Pencil
•
3: Eraser
•
4: Text tool
•
5: Scissors
•
6: Glue tool
•
7: Solo tool
•
8: Mute tool