X

Chapter 6 Euphonix devices 123
Use the Pan/Surround knobset
This knobset allows you to adjust a channel strip’s Pan/Surround control. If the channel strip’s
input format is set to Surround, the knobset displays the following parameters:
•
Surround Angle
•
Surround Diversity
•
LFE Level
•
Surround X (left/right)
•
Surround Y (front/back)
•
Spread
•
Center Level
Adjust the pan/surround control
1 Press the Pan/Surround knob top, or key, to display the Pan/Surround parameters for the
currently selected channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The parameter names are displayed on the Soft Keys, the touchscreen, or the display, depending
on the system you are using.
2 Rotate the respective knob to change the parameter value.
Pressing a knob top sets the controlled parameter to its default value.
3 Press the Back key to return to the top-level knobset.
Use the Group knobset
This knobset allows you to edit a channel strip’s group membership.
Add a channel strip to a group
1 Press the Group knob top, or key, to display the list of groups that the currently selected channel
strip is assigned to. This key is labeled Grp on the CM408T channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The group names are displayed on the Soft Keys, the touchscreen, or the display, depending on
the system you are using.
If a channel strip is associated with more than the rst eight groups, you can use the Page keys
to display ensuing groups.
2 Press the knob top that features the name of the group you want to associate the channel
strip with.
•
When you choose an inactive group number, the Group Settings window opens automatically,
with the channel strip being added to the group.
•
When you choose an active group number, the channel strip is added directly to the group.
Tip: The On key can also be used to switch between active and inactive group membership
for the selected channel strip.
3 Press the Back key to return to the top-level knobset.