X

Chapter 6 Euphonix devices 119
Use the Input knobset
This knobset behaves dierently, depending on the channel strip type you are working with—
audio or software instrument.
On audio channel strips, this knobset allows you to:
•
Set a channel strip’s input value (Input mode)
•
Set a channel strip’s input format (Input Conguration mode)
On software instrument channel strips, this knobset allows you to:
•
Edit an instrument plug-in (Input mode)
•
Change or insert an instrument plug-in (Input Conguration mode)
Set a channel strip’s input value
1 Press the Input knob top, or key, to display all possible channel input values for the selected
channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The input values are displayed on the Soft Keys, the touchscreen, or the display, depending on
the system you are using.
You can use the Page keys to display ensuing input values.
2 Press the knob top that features the name of the channel input value you want to set.
The currently active input value is indicated by a lit On key (on the MC Professional and
MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left of the
knob image.
Set an audio channel strip’s input format
1 Press the Input knob top or key.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
2 Press both Page keys simultaneously to switch to Input Conguration mode.
The selected channel strip’s input format values—Mono, Stereo, Left, Right, Surround—
are displayed.
The currently active format value is indicated by a lit On key (on the MC Professional and
MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left of the
knob image.
3 Press the respective knob top to choose the input format you want.