X

Chapter 6 Euphonix devices 118
Use the Inserts knobset
This knobset allows you to:
•
Edit an eect plug-in (Inserts mode)
•
Change or insert an eect plug-in (Inserts Conguration mode)
Note: This knobset only relates to insert eects and not to instrument plug-ins.
Edit an eect plug-in
1 Press the Inserts knob top, or key, to display all eect plug-ins inserted in the currently selected
channel strip. This key is labeled “*” (asterisk) on the CM408T channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
The eect plug-in names are displayed on the Soft Keys, the touchscreen, or the display,
depending on the system you are using.
If more than eight eect plug-ins are inserted, you can use the Page keys to display ensuing
plug-ins.
2 Press the knob top that features the name of the eect plug-in you want to edit.
The parameters are displayed in the order shown in the Controls view of the eect.
3 Rotate the respective knob to change the value.
Depending on the system you are using, for parameters with only two values, you can either
press the On key, or turn the respective knob, to switch between the two values. The On key is lit
when the value is 1 (or on) and unlit when the value is 0 (or o).
Pressing a knob top sets the controlled parameter to its default value.
If there are more than eight parameters, use the Page keys to navigate between them.
4 Press the Back key to return to the top-level knobset.
Change or insert an eect plug-in
1 Press the Inserts knob top or key. The key is labeled “*” (asterisk) on the CM408T channel strip.
Note: If using the MC Mix, press the CHAN key to enter Channel mode.
2 Press both Page keys simultaneously to display the Inserts Conguration knobset.
The rst eight Insert slots of the selected channel strip are displayed.
If an Insert slot already contains an eect plug-in, the On key is lit (on the MC Professional and
MC Mix devices). On the MC Control, it is indicated by a small green LED in the lower left of the
knob image.
3 Select the Insert slot you want by pressing the respective knob top. Press the Page keys to
display Insert slots 9 to 15.
The Eect plug-in menu appears. Press the Page keys to display ensuing plug-ins and to move
through the eect plug-in hierarchy.
4 Choose the eect plug-in you want:
•
Pressing the knob top enters a submenu or inserts a selected eect plug-in.
•
Pressing the Back key navigates up one level in the menu hierarchy.