X

Chapter 6 Euphonix devices 117
Euphonix knobsets
Euphonix knobsets overview
When using the Euphonix devices with Logic Pro, the Mixer’s channel strip functions can
be accessed and edited using knobsets. A knobset contains pages, each comprised of eight
parameters. Knobsets are organized hierarchically.
The top-level knobset leads to the following knobsets:
•
Inserts: Press the Inserts knob top to display all eect plug-ins inserted in the currently selected
channel strip. (See Use the Inserts knobset on page 118 .) If a plug-in is enabled (and does
not belong to the dynamic, EQ, or lter plug-in groups), either the On key is lit (MC Pro and
MC Mix) or the knob’s image shows a small green LED on the lower left (MC Control). To switch
the bypass state, press the respective On key or knob image, or the Ins In key on the CM408T
channel strip.
•
Input: Press the Input knob top to display all possible channel input values for the selected
channel strip. (See Use the Input knobset on page 119 .)
•
Dyn: The Dyn knob top is not currently used to display a list, or allow editing, of dynamic plug-
ins. If a dynamic plug-in is enabled, either the On key is lit (MC Pro and MC Mix) or the knob’s
image shows a small green LED on the lower left (MC Control). To switch the bypass state,
press the respective On key or knob image or the Dyn In key on the CM408T channel strip.
•
EQ: Press the EQ knob top to switch to EQ editing mode. (See Use the EQ knobset on page 121.)
If an EQ plug-in is enabled, either the On key is lit (MC Pro and MC Mix) or the knob’s image
shows a small green LED on the lower left (MC Control). To switch the bypass state, press the
respective On key or knob image or the EQ In key on the CM408T channel strip.
•
Aux or Sends: Press the Aux or Sends knob top to switch to send editing mode. See Use
the Aux or Sends knobset on page 122. If an Aux or Send is enabled, either the On key is
lit (MC Pro and MC Mix) or the knob’s image shows a small green LED on the lower left
(MC Control). Pressing the respective On key or knob image switches the bypass state.
•
Pan: Press the Pan knob top to switch to pan/surround editing mode. (See Use the Pan/
Surround knobset on page 123.)
•
Group: Press the Group knob top to switch to group editing mode. (See Use the Group
knobset on page 123.)
•
Mix or Output: Press the Mix or Output knob top to switch to output editing mode. (See Use
the Mix or Output knobset on page 124 .)