X

Chapter 6 Euphonix devices 115
Choose Euphonix automation modes
The Euphonix devices only support Read and Write automation modes. Logic Pro, however, also
features Touch and Latch automation modes. When you use the Euphonix devices, activating
Read/Write mode activates Touch mode in Logic Pro. Latch mode cannot be activated with these
devices.
Choose an automation mode on the MC Pro
1 Press the Wave and Select keys simultaneously.
2 Select the automation mode you want from the pop-up menu displayed on the touchscreen. You
can choose between:
•
Isolate: Automation mode is o.
•
Read: Activates Read mode in Logic Pro.
•
Write: Activates Write mode in Logic Pro.
•
Read/Write: Activates Touch mode in Logic Pro.
You can also use the Select key to switch between automation modes in Logic Pro:
•
When you set the automation mode to O or Read, the Select key switches between these
two modes.
•
When you set the automation mode to Read or Touch, the Select key switches between these
modes.
Choose an automation mode on a CM408T channel strip
1 Press the Wave and Y keys simultaneously.
The available automation modes are displayed in a pop-up menu on the CM408T display.
2 Use the fader of the channel strip to scroll through the following options:
•
Isolate: Automation mode is O.
•
Read: Activates Read mode in Logic Pro.
•
Write: Activates Write mode in Logic Pro.
•
Read/Write: Activates Touch mode in Logic Pro.
3 Use the Y key to conrm your selection, or the N key to cancel the operation.
Note: If a write automation mode (Touch, Latch, Write) is active (and an automation parameter
is enabled in the Logic Pro > Preferences > Automation > Touch/Latch/Write Erase settings), the
red “W” LED is lit. The green LED is lit when a read automation mode is active. Both LEDs are lit
when Touch or Latch mode is active.
Choose an automation mode on MC Artist devices
1 Hold down the Shift key.
2 Press the AUTO key repeatedly until your chosen automation mode appears on the display
screen. You can choose between:
•
Blank: Automation mode is O.
•
Read (r): Activates Read mode in Logic Pro.
•
Write (w): Activates Write mode in Logic Pro.
•
Read/Write (rw): Activates Touch mode in Logic Pro.