9

Chapter 4 Recording and Comping Audio
63
Set up a channel strip’s track for recording:
Click the Input slot of the left Arrange channel strip to choose the input for the 1
connected instrument.
Insert slot
Input slot
Input Monitoring button
If you want, you can add eects that t your instrument to the channel strip. For 2
example, if you want to record a guitar, click the top Insert slot of the left Arrange
channel strip, then choose Amps and Pedals > Amp Designer from the pop-up menu.
Repeat the steps for Insert slot 2, choosing Pedalboard from the pop-up menu.
Turn on the Input Monitoring button. 3
This allows you to hear incoming audio, even when the track is not record-enabled
(useful for setting audio levels or practicing before recording). Play your guitar and you
should hear it as well as see the level meters moving on the left Arrange channel strip.