9

Chapter 3 Working with Instruments and Eects
57
Select the previous or next channel strip setting:
Click the Setting button in the left Arrange channel strip, then choose Previous Channel 
Strip Setting or Next Channel Strip Setting from the pop-up menu. The Setting button,
Insert slots, and Instrument slot on the channel strip are updated to reect the new
setting.
Save and recall a channel strip setting:
Navigate through the categories and subcategories in the Library, then click any of the 1
entries.
The Setting button, Insert slots, and Instrument slot on the left Arrange channel strip
are updated to reect the channel strip setting and its eect and instrument plug-ins.
Click the left Arrange channel strip’s third Insert slot, then choose Amps and Pedals > 2
Amp Designer. The Amp Designer plug-in window opens. Change some settings.
Click the channel strip’s Setting button, choose “Save Channel Strip Setting as” from the 3
pop-up menu, type a name for the channel strip setting in the dialog, then click Save.
Click the channel strip’s Setting button, then choose a dierent setting from the pop-4
up menu.
Your channel strip setting is replaced with the new one.
Click the Setting button, then choose your previously saved channel strip setting from 5
the pop-up menu.
Your previously saved setting is recalled.
Reset a channel strip setting:
Click the Setting button in the left Arrange channel strip, then choose Reset Channel 
Strip from the pop-up menu. In a single action, the channel strip setting name, the
Instrument slot, and the Insert slots are reset to their default values.