9
Table Of Contents
- Logic Pro 9: Exploring Logic Pro
- Contents
- Chapter 1: Welcome to Logic Pro
- Chapter 2: Building a Basic Project
- Chapter 3: Working with Instruments and Effects
- Chapter 4: Recording and Comping Audio
- Chapter 5: Recording MIDI
- Chapter 6: Creating an Arrangement
- Chapter 7: Flex Time Editing
- Chapter 8: Editing MIDI Events
- Chapter 9: Mixing the Project
- Chapter 10: Automating Your Mix
- Chapter 11: Getting Answers
38
Chapter 2 Building a Basic Project
Try This
Mute and unmute channel strips and tracks:
Click the channel strip Mute (M) button. The track Mute button is also activated.
Click the track Mute button (or press Control-M). The channel strip Mute button is also
activated.
Drag over the Mute buttons of several tracks. They are all activated in one swipe.
Command-click the track Mute button. The mute state of all Mute buttons is cleared.
Solo and unsolo channel strips and tracks:
Repeat each of the previous tasks but this time using the channel strip Solo (S) button
and the track Solo button (or pressing Control-S).
Adjust the volume level of a channel strip:
Drag the channel strip’s Volume fader up or down.
Option-click the Volume fader. The Volume fader is reset to the default value.
Adjust the panning or balance of a channel strip:
Drag the Pan/Balance knob vertically or horizontally.
Option-click the Pan/Balance knob. The Pan/Balance knob is reset to the default value.
Open an existing plug-in:
Double-click any used Insert slot or Instrument slot on the channel strip. The plug-in
window of the inserted eect opens.