9

146
Chapter 9 Mixing the Project
Close the Group Settings window by clicking the window’s close button.4
Add another channel strip to the last created group:
Option-click the Group slot of channel strip 10 (another horn channel strip). The 
channel strip is added to the previously created group 2: Horns.
Change the settings of an active group:
Click the Group slot of channel strip 2, choose Open Group Settings from the pop-up 1
menu, select the Solo checkbox, then close the Group Settings window.
Back in the Mixer, click the Solo button on channel strip 2.2
All nine channel strips in Group 2: Horns are soloed.
Modify the volume level for the group:
Drag the Volume fader of any channel strip in Group 2: Horns. The Volume fader moves 
for each channel strip, while maintaining the relative values between them.
Modify the Pan control for the group:
Drag the Pan control of any channel strip in Group 2: Horns vertically or horizontally. 
The Pan control moves for each channel strip, while maintaining the relative values
between them.