7

Chapter 24 Sculpture 379
Post Processing
The “post processing” tools covered in this section impact on the summed stereo signal
of all voices, rather than on a per-voice basis.
Stereo Delay
This is a (song) tempo-syncable stereo delay. It may also be set to run freely (not
synchronized).
On/Off
The Stereo Delay button enables/disables the Delay section.
Wet Level
The Wet Level knob sets the level of the Delay output (wet signal). The parameter value
is expressed as a percentage (%). Dry level is 100%.
Feedback
Defines the amount of delay signal that is fed from the left out (of the delay unit) to the
left in (of the delay unit), and from right out to the right in. Negative values result in
phase-inverted feedback.
Crossfeed
As above, but this parameter defines the amount of delay signal that is fed from the
left out to right in and right out to left in (of the delay unit). Negative values result in
phase-inverted feedback of the crossfed signal.
LoCut
Determines the cutoff frequency of the highpass filter at the delay line output/
feedback loop.
HiCut
Determines the cutoff frequency of the lowpass filter at the delay line output/feedback
loop.