10.6

90Control Surfaces Support Guide
JLCooper CS-32 MiniDesk
Set up your JL Cooper CS-32 MiniDesk in
Logic Pro
Follow the steps below to use your JLCooper CS-32 MiniDesk control surface with
Logic Pro.
Important: JLCooper CS-32 MiniDesk units can be used only with MIDI connections.
Add JLCooper CS-32 control surfaces connected via MIDI
To use with Logic Pro:
1. Set the CS-32 to Host mode.
2. Make sure that your CS-32 units are connected to the computer via MIDI.
3. Choose Logic Pro > Control Surfaces > Setup.
4. Choose Install from the Setup window’s New menu.
5. Select the CS-32 from the list in the Install window.
6. Click the Scan button.
CS-32 MiniDesk assignments
Overview of JLCooper CS-32 MiniDesk assignments in
Logic Pro
Assignments of JLCooper CS-32 MiniDesk interface elements to Logic functions are
covered in these sections:
• JLCooper CS-32 MiniDesk display in Logic Pro
• JLCooper CS-32 MiniDesk pots in Logic Pro
• JLCooper CS-32 MiniDesk channel strips in Logic Pro
• JLCooper CS-32 MiniDesk bank button in Logic Pro
• JLCooper CS-32 MiniDesk F keys in Logic Pro
• JLCooper CS-32 MiniDesk cursor controls in Logic Pro
• JLCooper CS-32 MiniDesk transport controls in Logic Pro