10.6

87Control Surfaces Support Guide
TranzPort assignments
Frontier Design TranzPort channel strip in Logic Pro
The table outlines the channel strip controls and their assignments:
Note: A SHIFT (or other modifier) shown below a button description indicates that the
button has an alternate use while the modifier is held down.
Control Modifier Assignment
<CHAN Shifts the currently displayed
channel to the left by one channel.
SHIFT Shifts the currently displayed
channel left by eight channels.
CHAN> Shifts the currently displayed
channel right by one channel.
SHIFT Shifts the currently displayed
channel right by eight channels.
REC Turns the Record Enable button of
the currently displayed channel on
or off.
SHIFT Disables the Record Enable buttons
of all channels.
SOLO Enables or disables Solo for the
currently displayed channel.
SHIFT Disables Solo for all channels.
MUTE Enables or disables Mute for the
currently displayed channel.
SHIFT Disables Mute for all channels.
ANY SOLO Lit if any tracks, channels, or
regions are soloed.
UNDO Undo
SHIFT Redo
Frontier Design TranzPort master controls in Logic Pro
The table outlines the master controls and their assignments:
Note: A SHIFT (or other modifier) shown below a button description indicates that the
button has an alternate use while the modifier is held down.
Control Modifier Assignment
SHIFT Modifier that alters the function of
other controls.
IN Moves playhead to left cycle
locator.